manualshive.com logo in svg

Epson DM-M820, Technical Reference Manual, Page: 89 / 324

Share
Download
Epson DM-M820 Technical Reference Manual Download Page 89

Rev. I

OS and Drivers   

4-39

MR Series Technical Reference Manual

Installing the Display Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive and start 

\Win98\Video\Win9Xe66.EXE.

2. The Readme.txt dialog box is displayed. Click 

Next

.

3. The Setup Wizard starts and the Welcome screen is displayed. Click 

Next

.

4. The License Agreement dialog box is displayed. Click 

Yes

.

5. Installing is completed and the Reboot dialog box is displayed. Confirm that [Yes, I want to 

restart my computer now] is selected, and click 

Finish

 to reboot the system.

Uninstalling the display driver

Uninstalling cannot be done.

Installing the Sound Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive. Start 

Win98\Sound\SETUP.EXE.

2. The Setup Wizard starts and the Welcome dialog box is displayed. Click 

Next

.

3. The reboot dialog box is displayed. Confirm that the [Yes, I want to restart my computer 

now] is selected, and click 

Finish

 to reboot the system.

4. The Sound Driver is installed after the system is rebooted.

5. Another message box is displayed. Click 

OK

.

6. The dialog box that specifies the lication of the driver file is displayed. Input 

D:\Win98\Sound\Smax\WDM\SE to [Copy files from] (If the CD-ROM drive is the D 
drive). Click 

OK

 and installing is completed.

Uninstalling the sound driver

1. Select [Start Menu] - [Settings] and open the control panel.

2. Select [Add/Remove Hardware] in the control panel.

3. Select [SoundMAX].

4. Click 

Add/Remove

.

5. The confirmation dialog box of the uninstalling is displayed. Select [Remove] and click 

Next

.

Summary of Contents for DM-M820





































































































































































































































































































































Reviews:

No comments