Epson DM-M820 Technical Reference Manual Download Page 115

Page: 115 / 324

Rev. I

OS and Drivers

4-65

MR Series Technical Reference Manual

•

Down 5:
This sets the touch operation recognized as the 3rd click.
(Down 5 becomes valid when it executed in the click time.)

•

Up 6:
This sets the touch operation recognized as the 3rd click
cancellation.

The following are the choices for the trigger settings

•

None:
Does not assign a touch operation.

•

Immediate:
Executes immediately after a touch operation.

•

Touchdown:
Executes when the panel is touched.

•

Liftoff:
Executes when the finger leaves the touch panel.

•

Time:
Executes when the touching is stationary.

•

Tap:
Executes when the panel is touched two times quickly.

Note:

Don't set Down 5 and Down 6 to “Immediate” because the system gets into a loop and has to be reset.

❏

[Add]
This adds a new button mode.

❏

[Delete]
This deletes a button mode.

❏

[Defaults]
This returns the button mode to its original settings.

Summary of Contents for DM-M820





































































































































































































































































































































Search results

Summary of Contents for DM-M820

Reviews:

Epson DM-M820, Technical Reference Manual, Page: 115 / 324

Search results

Summary of Contents for DM-M820

Reviews: