Epson DM-M820 Technical Reference Manual Download Page 74

Page: 74 / 324

4-24

OS and Drivers

Rev. I

7. The confirmation dialog box of the uninstalling is displayed. Select that the [Yes, I want to

uninstall this device], and click

Next

8. Uninstalling is completed and the dialog box is displayed. Click

Finish

Installing the Display Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive. Start

Win2K\Video\Win2K-XPE66.EXE.

2. The Release note is displayed. Click

Next

3. The Setup Wizard starts and the Welcome dialog box is displayed. Click

Next

4. The License Agreement dialog box is displayed. Click

Yes

5. Installing is completed and the reboot dialog box is displayed. Confirm that [Yes, I want to

restart my computer now] is selected, and click

Finish

to reboot the system.

Uninstalling the display driver

Uninstalling cannot be done.

Installing the Sound Driver

This is installed by the exclusive installation program.

1. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive. Start

Win2K\Sound\SETUP.EXE.

2. The Setup Wizard starts and the Welcome dialog box is displayed. Click

Next

3. The reboot dialog box is displayed. Confirm that [Yes, I want to restart my computer now] is

selected, and click

Finish

to reboot the system.

Uninstalling the sound driver

1. Select [Start Menu] - [Settings] and open the control panel.

2. Select [Add/Remove Hardware] in the control panel.

3. Add/Remove Hardware Wizard starts and the Welcome dialog box is displayed. Click

Next

4. The Choose a Hardware Task dialog box is displayed. Select [Uninstall/Unplug a device],

and click

Next

5. The Choose a Removal Task dialog box is displayed. Select [Uninstall a device], and click

Next

6. Select [SoundMAX Integrated Digital Audio] in the list and Click

Next

7. The confirmation dialog box of the uninstalling is displayed. Select [Yes, I want to uninstall

this device] and click

Next

Summary of Contents for DM-M820





































































































































































































































































































































Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands

Epson DM-M820, Technical Reference Manual

Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands