Epson DM-M820, Technical Reference Manual

Page: 241 / 324

Rev. I Disassembly and Assembly 9-25
MR Series Technical Reference Manual
8. Remove the
LCD
while pulling the cable from the hole.
To install, reverse the removal procedure.
Switch Circuit Board
Follow the steps below for disassembly for the model DM-M820-014/024 and DM-M820-015/
025.
Note:
If you remove the LCD for the model DM-M820-013/023, follow the steps below except step 5.
1. Remove the
rear case.
(See page 9-11.)
2. Remove the front case . (See page 9-13.)
3. Remove the rear panel. (See page 9-13.)
4. Remove the LCD Circuit Board . (See page 9-15.)
5. Remove the touch panel . (See page 9-18.)
6. Remove the LCD . (See page 9-24.)
hole
hole