manualshive.com logo in svg

Epson DM-M820, Technical Reference Manual, Page: 234 / 324

Share
Download
Epson DM-M820 Technical Reference Manual Download Page 234

9-18

   Disassembly and Assembly

Rev. I

Removing the Touch Panel Assembly

Follow the steps below to disassemble the touch panel assembly (1056).

1. Remove the

 rear case.

 (See page 9-11.)

2. Remove the

 front case 

from the front panel unit. (See page 9-13.)

3. Remove the rear panel. (See page 9-13.)

4. Remove the LCD circuit board. (See page 9-15.)

5. Disconnect the touch panel cable from the cable for the circuit board, as shown below, by 

releasing the patch, and remove the touch panel cable.

 

Note:

Be careful not to get any foreign material between the LCD and the touch panel.

cable connection

locked

released

touch panel cable

patch

cable for the circuit board

Summary of Contents for DM-M820





































































































































































































































































































































Reviews:

No comments