Epson DM-M820, Technical Reference Manual

Page: 68 / 324

4-18 OS and Drivers Rev. I
2. Select [Start Menu] and open the control panel.
3. Select [Printers and Other Hardware] in the control panel.
4. Select [System] in the [See Also].
5. The System dialog is displayed. Select the [Hardware] tab.
6. Click Device Manager .
7. Select [Other Devices] - [PCI Serial Port] in the list, and click Properties .
8. The Properties dialog box is displayed. Click
Reinstall Driver
.
9. The [Welcome to the Hardware Update Wizard] dialog box is displayed. Select the "Install
from a list or specific location" checkbox and click Next .
10. The [Hardware Installation] dialog box is displayed. Click Continue Anyway .
11. The [Completing the Hardware Update Wizard] dialog box is displayed. Click Finish .
12. Next the Serial Port 1 is automatically recognized and the [Welcome to the Found New
Hardware Wizard] dialog box is displayed. Select the "Install the software automatically"
check box and click
Next .
13. The [Hardware Installation] dialog box is displayed. Click Continue Anyway .
14. The [Completing the Found New Hardware Wizard] dialog box is displayed. Click Finish .
15. Next the Serial Port 2 is automatically recognized and the [Welcome to the Found New
Hardware Wizard] dialog box is displayed. Select the "Install the software automatically"
check box and click
Next .
16. The [Hardware Installation] dialog box is displayed. Click Continue Anyway .
17. The [Completing the Found New Hardware Wizard] dialog box is displayed. Click Finish .
Uninstalling the serial port driver
Uninstalling cannot be done.
Installing the Touch Panel Driver, MSR Utility and the Other Devices
See the Installation of Other Drivers section on page 4-45.