Epson DM-M820, Technical Reference Manual, Page: 54 / 324

4-4 OS and Drivers Rev. I
Windows 2000 Pre-Installed Model
The exclusive EPSON utility and drivers for using IM-800 are pre-installed in the HDD with the
pre-installed Windows 2000 Professional.
Installation Procedure
Formatting the hard disk
The hard disk is composed of one partition of up to 10 GB as a system area. For a hard disk of
more than 10 GB, the excess area other than the system area, is not yet formatted. This drive can
be converted to NTFS using the Convert command. Use the disk administrator when creating a
drive in the unused area. The start-up drive has been formatted to the following file system.
• File system: FAT32
• Volume label: Windows 2000
When using the DM-M820 with Touch Panel, follow the steps as below.
Windows 2000 Installation
When turning on the power supply, the installation starts. Enter the product
key of the W2K label pasted on the product. You can set up the Network
automatically or set it up later.
Touch Panel Driver Installation
Install the Touch Panel Driver from the CD-ROM for the DM-M820. See
page 4-45
for the procedure.
Change of Double click settings
Set up this setting every time a new user starts using Windows 2000.
MSR Utility Installation
When using the DM-M820 with MSR, install the MSR utilities from
C:\backup\msrcfg folder or the Driver CD-ROM for the IM-800.
Other software Installation
When using OPOS-ADK, APD (Windows printer drivers) and Unimini,
install the software from the Driver CD-ROM for the IM-800.