Epson DM-M820, Technical Reference Manual

Page: 56 / 324

4-6 OS and Drivers Rev. I
Directory Configuration
The root directory of the HDD is structured as follows.
|--- Backup
| |--- Msrcfg
: Backup of MSR Utility
| | |--- Win :
| | | |--- Disk1 : Backup of MSR Utility for Windows
| | |--- DOS : Backup of MSR Utility for MS-DOS
| |--- Chipset : Chipset driver backup folder
| | |--- Win2000 :
| |--- Network : Network driver backup folder
| |--- Recovery : Recovery folder
| |--- Serial : Serial port driver backup folder
| |--- Sound : Sound driver backup folder
| |--- Video : Video driver backup folder
| |--- Win2ksp2 : Windows 2000 Service Pack 2 backup folder
|--- BOOTDISK : Folder for files used to create an ordinary boot floppy disk
|--- Documents and Settings: Folder for saving text and settings.
|--- I386 : Setup file folder
|--- Mui :
|--- Program Files : Windows utility folders
|--- WINNT : Windows folders
The I386 directory may be deleted after the addition of the Windows 2000 application and the
addition / change of the driver.
The directories under the Backup directory are the backups for drivers and utilities. Each of
these directories can be backed up into CD-R or other media. After being backed up, these
directories may be deleted.
Windows 2000 Setup Procedure
CAUTION
Because the touch panel is not operative during the setup procedure, be sure to keep
the keyboard connected. If necessary, start the setup procedure after connecting the
mouse.
The keyboard is necessary for inputting the product ID and password. The keyboard is
also necessary for user verification during logon to Windows 2000, even if the touch
panel is in a usable state.
Windows 2000 is setup by using the following procedure.
1. Turn on the system, and boot the system from the pre-installation HDD. Windows 2000
setup will start.
2. The License Agreement screen is displayed. Check the contents, then select [I accept this
agreement] and click Next .