Epson DM-M820, Technical Reference Manual

Page: 65 / 324

Rev. I OS and Drivers 4-15
MR Series Technical Reference Manual
3. Write all data saved in step 2 onto a CD-R.
4. After saving the data, the directory under the C:\backup\recovery directory may be
deleted.
❏
Backing up each driver
Each directory under the C:\backup directory is the backup of each driver, which can be
backed up through individual saving.
Recovering method
❏
Editing the start-up disk
Edit CONFIG.SYS and AUTOEXE.BAT created in “Preparing a Recovery Medium” to the
device on which the image data has been saved.
❏
Recovering
1. Connect the medium or drive onto which the data has been saved in “Preparing a
Recovery Medium” to the IM-800.
2. Start the system by using the start-up floppy disk created in “Preparing a Recovery
Medium.”
3. Enter “x: [enter]” (x: Drive with the image file).
4. The following message appears. Select and enter the partition size of the HDD.
Please select the system partition size.
1: 10GB (Default size)
F: Full size of HD.
Please push a key of 1 or F._
5. Execute Start.bat.
6. Following the title “EasyRestore,” the EPSON Logo Startup screen is displayed. Select
Continue .
7. After the OS is recovered, set up the OS.
8. Return the printer driver for OPOS and Windows saved in “Preparing a Recovery
Medium.”
Restrictions
❏
The size of the image data to be saved amounts to 500–600 MB. Saving this much data
requires a large-capacity device, such as a CD-R, MO, or server.
❏
Because of restrictions by EasyRestore, the HD image data file (HDIMG003.PQI) cannot be
divided.
❏
Because EasyRestore runs only on MS-DOS, it is a requirement of “Saving of HD Image
Data” that MS-DOS can recognize the saving destination device.
❏
When startup is initiated from the built-in hard disk of the IM-800, recovery is impossible.