manualshive.com logo in svg

Epson DM-M820, Technical Reference Manual, Page: 284 / 324

Share
Download
Epson DM-M820 Technical Reference Manual Download Page 284

9-68

   Disassembly and Assembly

Rev. I

8. Remove the power supply from the lower frame by first moving it in the direction of 

arrow 1, then in the direction of arrow 2.

To install, reverse the removal procedure.

Note:

During reassembly confirm that the power supply is attached to the lower frame as shown in the 
illustration above.

CAUTION:

Also, when you place the cable of power supply, put it under the USB cable. 

Do not arrange the cable of the power supply near the end of the case. Otherwise, it 
may be damaged when you install the IM-800 upper case or the CD/FDD bracket.

Do not arrange the cable of the power supply under the main circuit board. Otherwise, 
it may be damaged when you connect the other cables to the main circuit board.

2 

1 

lower frame

USB cable

Summary of Contents for DM-M820





































































































































































































































































































































Reviews:

No comments