Epson DM-M820 Technical Reference Manual Download Page 237

Page: 237 / 324

Rev. I

Disassembly and Assembly

9-21

MR Series Technical Reference Manual

4. Remove the 6 pieces of exfoliation paper attached to the plates.

5. Use the touch panel position adjust jig to adjust the position of the touch panel.

6. Attach the touch panel, being careful to align the corners.

Note:

Be sure to attach the touch panel with the character side up.

7. Press the touch panel down so that the double-coated tape is bonded to the touch panel.

lower plate (121)

upper plate (120)

exfoliation paper

touch panel
position adjust jig

touch panel (115)

position of the characters

Summary of Contents for DM-M820





































































































































































































































































































































Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands

Epson DM-M820, Technical Reference Manual

Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands