Epson DM-M820 Technical Reference Manual Download Page 99

Page: 99 / 324

Rev. I

OS and Drivers

4-49

MR Series Technical Reference Manual

4. Click

Add/Remove

5. The Uninstall Universal Pointer Device Driver dialog box is displayed. Click

Next

6. The Uninstall Completed dialog box is displayed. Click

Finish

7. The dialog box to require rebooting the system is displayed. Click

Yes

and reboot the

system.

Installing the Touch Panel Driver for MS-DOS

Note

Be sure to set the touch panel driver to COM1 or COM2. COM3/COM4 cannot be used.

This is installed by the exclusive installation program.

1. Insert the touch panel driver CD-ROM for the DM-M820 to the CD-ROM drive. Start

\Dos\INSTALL.EXE.

2. The touch screen screen is displayed. Select AHL/AR5000 and Digitouch Controllers by

using the cursor keys, and press

Enter

3. The Installation Options screen is displayed. Normally, leave the default setting as it is. To

change the setting, select the item to be selected by using the cursor keys, and press

Enter

The setting contents are changed. Select Start Installation, and press

Enter

to start copying

the file to C:\TOUCH directory.

4. After copying is complete, press any key. The hardware setting is displayed.

5. Press any key. Readme is displayed.

6. Press

Esc

to terminate installation.

7. Enter the following from the prompt to install the driver:

For example: Set to COM2

TTDOS 2 /I:3

Enter

TBMOUSE 1

Enter

TT-DOS Command Line

TTDOS [Port] [/A:address] [/C:bbbb,p,s][/I]

Port:

Specifies the serial port [Default:1]

/A:Address:

Port address [Default: 3F8]

/C:bbbb,p,d,s

Communications parameters

bbbb:

Baudrate [Default: 9600]

Parity (N,O,E) [Default: N]

Data bit (7,8) [Default: 8]

Stop bit (1,2) [Default: 1]

/I:Irq.

Interrupt request number (0 to 15)

Summary of Contents for DM-M820





































































































































































































































































































































Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands

Epson DM-M820, Technical Reference Manual

Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands