Epson DM-M820 Technical Reference Manual Download Page 252

Page: 252 / 324

9-36

Disassembly and Assembly

Rev. I

7. Remove four screws (S05) securing the touch panel set to the front panel unit while lifting

the touch panel set.

To install, reverse the removal procedure.

Note:

Attach the touch panel set (1056) after removing dust from the touch panel set and the surface of the LCD
with an air sprayer.

When reattaching the touch panel assembly, align the position of the holes in the touch panel assembly and
the front panel unit.

Touch panel set
(1056)

screw (S05)

Summary of Contents for DM-M820





































































































































































































































































































































Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands

Epson DM-M820, Technical Reference Manual

Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands