Epson DM-M820, Technical Reference Manual

Page: 40 / 324

2-6 Setup for the IM-800 and the DM-M820 Rev. I
Keyboard and Mouse
To use a USB keyboard or mouse under MS-DOS or Windows NT, set USB keyboard support or
USB mouse support in the
Integral Peripheral
section of the BIOS setup.
Using a PS/2 mouse
To use a PS/2 mouse, you must be sure that USB mouse support in the
Integrated
Peripheral
section of the BIOS is set to
Disabled
(which is the factory setting).
TM-Printer
Use the dedicated power supply for the power supply of the TM-Printer. (For the standard
model)
Connect the power supply of the TM-Printer to the DC24V Output using the DC cable. (For the
24V model)
PCI Cards
See the PCI information in Chapter 3, “Hardware Specifications,” and Chapter 9, “Disassembly
and Assembly.”
Connecting the Power Cable
When AC power is supplied, a minute electric current flows through the IM-800. Therefore,
before connecting peripherals and cables to this product, unplug the AC cord.
WARNING:
Never insert or disconnect the power plug with wet hands. Doing so may result in severe
shock.
Always supply power directly from a standard domestic power outlet.
Do not place multiple loads on the power outlet (wall outlet). Overloading the outlet
may lead to fire.
The equipment must be installed near the electrical outlet, and the outlet must be easily
accessible.
Be sure your power cable meets the relevant safety standards and includes a power
system ground terminal (PE terminal).