Epson DM-M820 Technical Reference Manual Download Page 275

Page: 275 / 324

Rev. I

Disassembly and Assembly

9-59

MR Series Technical Reference Manual

10. To remove the second 2.5”HDD remove the four screws shown in the figure below securing

the HDD and remove the SHORTPLUG for the 2.5”HDD.

When you install two 2.5”HDD, the master or slave can be installed on the top or bottom.

When you install the 2.5”HDD, you need to set the HDD jumpers properly.

When connecting two 2.5”HDDs, one is Master and the other is Slave.

Set Master/Slave by the jumper of the HDD.

As for the procedure, see "HDD".

Example: For the Hitach Travelstar

To install, reverse the removal procedure.

2.5”HDD

SHORT PLUG

PIN1

Master

Slave

Summary of Contents for DM-M820





































































































































































































































































































































Search results

Summary of Contents for DM-M820

Reviews:

Epson DM-M820, Technical Reference Manual, Page: 275 / 324

Search results

Summary of Contents for DM-M820

Reviews: