Epson DM-M820, Technical Reference Manual

Page: 63 / 324

Rev. I OS and Drivers 4-13
MR Series Technical Reference Manual
Windows 98 Set-Up Procedure
Windows 98 is set up by using the following procedure:
1. Connect the keyboard and mouse to the IM-800.
2. Turn on the PC to start Windows 98 SE.
3. The Enter Network Password dialog box is displayed. Input the password and click OK .
4. The Welcome screen is displayed. Input the necessary information and click Next .
5. The Windows End User license Agreement is displayed. Read it though and confirm your
agreement to the terms. And then select [I accept this agreement] and click Next to proceed.
6. The Windows Product Key screen is displayed. Input the 25-digit product key shown on the
COA (Certificate of Authenticity). Click
Next
to begin setup. If you enter an incorrect key, a
message is displayed indicating that. Select [Re-enter valid product key] and then click Next
to return to the Windows Protect Key screen and input the product key again.
7. When setup is completed, the Congratulations screen is displayed. Click Finish .
8. The system asks you to set the Date and Time properties. Check the properties displayed,
and change them as needed. Click Close to confirm the settings.
9. The system setting is automatically updated, the system is rebooted, and the Windows 98 SE
desktop appears.
Installing the MSR Utility for Windows
Install the MSR Utility by the following procedure.
1. Start C:\Backup\Msrcfg\ Win\Disk1\SETUP.EXE.
2. The Setup Wizard starts and the Welcome dialog box is displayed. Click Next .
3. The Choose Destination Location dialog box is displayed. Specify the directory where the
program is to be installed and click Next . C:\Program Files\MSR Config is specified as the
default.
4. Installing is completed, and the Setup dialog box is displayed. Click Finish .
Uninstalling the MSR Utility
for Windows
Uninstall the MSR Utility by the following procedure.
1. Select [Start Menu] - [Settings] and open the control panel.
2. Select [Add/Remove Programs] in the control panel.
3. Select [DM-MS Series Configuration Utilities].
4. Click Add/Remove .