Operation
Proline Promass F 200 HART
92
Hauser
Pulse output
-
Displays the value
currently measured for
the pulse output.
Positive floating-point
number
Output frequency
-
Displays the value
currently measured for
the frequency output.
0 to 1
250 Hz
Switch status
-
Displays the current
switch output status.
• Open
• Closed
11.5
Adapting the measuring device to the process conditions
The following are available for this purpose:
• Basic settings using the
Setup
• Advanced settings using the
Advanced setup
11.6
Performing a totalizer reset
In the
Operation
submenu, 2 parameters with various options for resetting the three totalizers are
available:
• Control totalizer 1-3
• Reset all totalizers
Navigation path
"Display/operat." menu
®
Operation
Function scope of the "Control totalizer" parameter
Options
Description
Reset + hold
The totaling process is stopped and the totalizer is reset to 0.
hold
The totaling process is stopped and the totalizer is set to the defined start value in the
Preset
parameter.
Reset + totalize
The totalizer is reset to 0 and the totaling process is restarted.
totalize
The totalizer is set to the defined start value in the
Preset
parameter and the totaling process
is restarted.
Function scope of the "Reset all totalizers" parameter
Options
Description
Reset + totalize
Resets all the totalizers to 0 and restarts the totaling process. This deletes all the flow values
previously totalized.
"Operation" submenu
Operation
®
Control totalizer 1
Preset value 1
Control totalizer 2
Preset value 2
Control totalizer 3
