Diagnostics and troubleshooting
Proline Promass F 200 HART
108
Hauser
I1156
Memory error trend
I1157
Memory error event list
I1185
Display backup done
I1186
Restore via display done
I1187
Settings downloaded with display
I1188
Display data cleared
I1189
Backup compared
I1209
Density adjustment OK
I1221
Error during zero point adjustment
I1222
Zero point adjustment OK
I1227
Sensor emergency mode activated
I1228
Sensor emergency mode failed
I1256
Display: access status modified
I1335
Firmware changed
I1397
Fieldbus: access status modified
I1398
CDI: access status modified
12.9
Resetting the measuring device
Using the
Device reset
parameter it is possible to reset the entire device configuration or some of
the configuration to a defined state.
Navigation path
"Diagnostics" menu
®
Device reset
®
Device reset
Function scope of the "Device reset" parameter
Options
Description
Cancel
The user exists the parameter and no action is performed.
To factory defaults
Every parameter is reset to its factory setting.
To delivery settings
Every parameter for which a customized default setting was ordered is reset to that
customized value; all other parameters are reset to their factory setting.
This option is not visible if no customized settings were ordered.
Restart device
Restarting the device resets every parameter whose data are saved in the volatile memory
(RAM) to the parameter's factory setting (e.g. measured value data). The device
configuration remains unchanged.
12.10 Device information
The
Device information
submenu contains all the parameters that display different information
for identifying the device.
