Commissioning
Proline Promass F 200 HART
82
Hauser
Decimal places 2
A measured value is specified in
the parameter
Value 2
display
.
Select the number of
decimal places for
the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
Decimal places 3
A measured value is specified in
the parameter
Value 3
display
.
Select the number of
decimal places for
the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
Decimal places 4
A measured value is specified in
the parameter
Value 4
display
.
Select the number of
decimal places for
the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
Display interval
-
Set time measured
values are shown on
display if display
alternates between
values.
1 to 10 s
5 s
Display damping
-
Set the reaction time
of the local display to
fluctuations in the
measured value
caused by process
conditions.
0 to 999 s
0 s
Header
-
Select header
contents on local
display
• Device tag
• Free text
Device tag
Header text
The
Free text
option is selected
in the
Header
parameter.
Enter display header
text.
Max. 12 characters
such as letters,
numbers or special
characters
- - - - - - - - - - - -
Separator
-
Select decimal
separator for
displaying numerical
values.
• . (point)
• , (comma)
. (point)
Backlight
-
Switch the backlight
of the local display
on and off.
• Disable
• Enable
Enable
10.6
Configuration management
After commissioning, you can save the current device configuration, copy it to another measuring
point or restore the previous device configuration.
You can do so using the
Configuration management
parameter and the related options found in
the
Conf. backup disp.
submenu.
