Diagnostics and troubleshooting
Proline Promass F 200 HART
98
Hauser
12.2
Diagnostic information on local display
12.2.1 Diagnostic message
Faults detected by the self-monitoring system of the measuring device are displayed as a diagnostic
message in alternation with the operational display.
Operational display in alarm condition
Diagnostic message
S441
1
2
4
3
X X X X
X X X
X
X
X X X X
X X X
X
X
2
S
S
mA
i
20.50
5
Curr. output 1
Menu
A0013939-EN
1
2
3
4
5
Status signal
Diagnostic behavior
Diagnostic behavior with diagnostic code
Short text
Operating elements
If two or more diagnostic events are pending simultaneously, only the message of the diagnostic
event with the highest priority is shown.
Other diagnostic events that have occurred can be called up in the
Diagnostics
menu:
Status signals
The status signals provide information on the state and reliability of the device by categorizing the
cause of the diagnostic information (diagnostic event).
Symbol
Meaning
A0013956
Failure
A device error has occurred. The measured value is no longer valid.
A0013959
Function check
The device is in service mode (e.g. during a simulation).
A0013958
Out of specification
The device is operated:
• Outside its technical specification limits (e.g. outside the process temperature range)
• Outside of the configuration carried out by the user (e.g. maximum flow in parameter
20 mA
value
)
A0013957
Maintenance required
Maintenance is required. The measured value is still valid.
The status signals are categorized according to VDI/VDE 2650 and NAMUR Recommendation
NE 107: F = Failure, C = Function Check, S = Out of Specification, M = Maintenance Required
