Proline Promass F 200 HART
Basic safety instructions
Hauser
9
The external surface temperature of the housing can increase by max. 20 K due to the power
consumption of the electronic components. Hot process fluids passing through the measuring device
will further increase the surface temperature of the housing. The surface of the sensor, in particular,
can reach temperatures which are close to the fluid temperature.
Possible burn hazard due to fluid temperatures!
►
For elevated fluid temperature, ensure protection against contact to prevent burns.
2.3
Workplace safety
For work on and with the device:
►
Wear the required personal protective equipment according to federal/national regulations.
For welding work on the piping:
►
Do not ground the welding unit via the measuring device.
2.4
Operational safety
Risk of injury.
►
Operate the device in proper technical condition and fail-safe condition only.
►
The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable dangers.
►
If, despite this, modifications are required, consult with Hauser.
Repair
To ensure continued operational safety and reliability,
►
Carry out repairs on the device only if they are expressly permitted.
►
Observe federal/national regulations pertaining to repair of an electrical device.
►
Use original spare parts and accessories from Hauser only.
2.5
Product safety
This measuring device is designed in accordance with good engineering practice to meet state-of-
the-art safety requirements, has been tested, and left the factory in a condition in which they are
safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC directives
listed in the device-specific EC Declaration of Conformity. Hauser confirms this by affixing
the CE mark to the device.
