Commissioning
Proline Promass F 200 HART
66
Hauser
Assign diagnostic behavior
Select the diagnostic
behavior for the switch
output.
• Alarm
• Alarm or warning
• Warning
Alarm
Assign limit
Select the process variable for
the limit function.
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
Mass flow
Assign flow direction check
Select the process variable for
monitoring the direction of
flow in your process.
• Mass flow
• Volume flow
• Corrected volume flow
Mass flow
Assign status
Select the device status for
the switch output.
• Partial filled pipe detection
• Low flow cut off
Partial filled pipe detection
Mass flow unit
Select the unit for mass flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list
Country-dependent:
• kg/h
• lb/min
Volume flow unit
Select the unit for volume
flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list
Country-dependent:
• l/h
• gal/min (us)
Corrected volume flow unit Select the unit for corrected
volume flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list
Country-dependent:
• Nl/h
• Scf/min
Density unit
Select the unit for density.
Result
The selected unit applies for:
– Outputs
– Low value partial filled
pipe detection
– High value partial filled
pipe detection
– Simulation process
variable
– Density adjustment (in the
Expert
menu)
Unit choose list
Country-dependent
• kg/l
• lb/cf
