Proline Promass F 200 HART
Commissioning
Hauser
87
The parameter values are now read only and cannot be edited any more (exception
Contrast
display
):
• Via local display
• Via service interface (CDI)
• Via HART protocol
+
E
–
3 mm
XXXXXXXXXXXXX
WP
CDI
SIM
ON
OFF
A0013768
1. Loosen the securing clamp.
2. Unscrew the electronics compartment cover.
3. Pull out the display module with a gentle rotational movement.
4.
A0013909
To make it easier to access the lock switch, attach the display module to the edge of the
electronics compartment.
5. Setting the write protection switch (WP) on the main electronics module to the ON position
enables the hardware write protection. Setting the write protection switch (WP) on the main
electronics module to the OFF position (factory setting) disables the hardware write protection.
Ã
If hardware write protection is enabled, the
Hardware locked
option is displayed in the
Locking status
89). In addition, on the local display the -symbol
appears in front of the parameters in the header of the operational display and in the
navigation view.
