Operation
Liquiline System CA80HA
68
Hauser
Menu/Setup/General settings/Logbooks
Function
Options
Info
Data logbooks
For connected Memosens sensors (optional)
New
You can create a maximum of 8 data logbooks.
Logbook name
Customized text, 20 characters
Source of data
Selection
• Sensor inputs
• Controller
• Current inputs
• Temperature
• Fieldbus signals
• Mathematical functions
Factory setting
None
‣
Select a data source for the logbook entries.
You can choose from the following:
• Connected sensors
• Available controllers
• Current inputs
• Fieldbus signals
• Binary input signals
• Mathematical functions
Measured value
Selection
Depends on
Source of data
Factory setting
None
You can record different measured values
depending on the data source.
Scan time
0:00:01 to 1:00:00
Factory setting
0:01:00
Minimum time interval between two entries
Format: H:MM:SS
Data logbook
Selection
• Ring buffer
• Fill up buffer
Factory setting
Ring buffer
Ring buffer
If the memory is full, the most recent entry
automatically overwrites the oldest entry.
Fill up buffer
If the memory is full, there is an overflow,i. e.
no new values can be saved. The controller
displays a corresponding diagnostic message.
The memory then has to be cleared manually.
Overflow warnings
Data logbook
=
Fill up buffer
Selection
• Off
• On
Factory setting
Off
‣
Decide whether you want to receive a
diagnostic message if the fill buffer of the
relevant logbook overflows.
Add another logbook
Action
Only if you want to create another data
logbook immediately. You add a new data
logbook at a later date using
New
.
Finished
Action
This allows you to exit the
New
menu.
Summary of Contents for Liquiline System CA80HA
Page 2: ......
Page 214: ...www addresses endress com 71532810 71532810 ...