Endress+Hauser Liquiline System CA80HA, Operating Instructions Manual

Page: 69 / 214

Liquiline System CA80HA Operation
Hauser 69
Menu/Setup/General settings/Logbooks
Function Options Info
Start/stop simultaneously Action Appears if you have created more than one
data logbook. With one mouse click, you can
start or stop recording all the data logbooks.
Logbook name The name of this submenu is based on the
name of the logbook and only appears once
you have created a logbook.

This menu appears several times if you have several data logbooks.
Source of data Read only This is for information purposes only. If you
want to record another value, delete this
logbook and create a new data logbook.
Measured value
Log time left
Data logbook = Fill up buffer
Read only Displays the days, hours and minutes
remaining until the logbook is full.
Log size
Data logbook = Fill up buffer
Read only Displays the number of entries remaining until
the logbook is full.
Logbook name Customized text, 20 characters You can change the name here again.
Scan time 0:00:01 to 1:00:00
Factory setting
0:01:00
As above
Minimum time interval between two entries
Format: H:MM:SS
Data logbook Selection
• Ring buffer
• Fill up buffer
Factory setting
Ring buffer
Ring buffer
If the memory is full, the most recent entry
automatically overwrites the oldest entry.
Fill up buffer
If the memory is full, there is an overflow, i. e.
no new values can be saved. The controller
displays a corresponding diagnostic message.
The memory then has to be cleared manually.
Overflow warnings
Data logbook = Fill up buffer
Selection
• Off
• On
Factory setting
Off
‣
Decide whether you want to receive a
diagnostic message if the fill buffer of the
relevant logbook overflows.