Endress+Hauser Liquiline System CA80HA, Operating Instructions Manual

Page: 187 / 214

Liquiline System CA80HA Repair
Hauser 187
12.3.3 Rinsing the system
1. Open all the reagent bottles and carefully remove the hoses. Open all the bottles if you
wish to replace dispensers or hoses.
2. Dry the ends of the hoses with a clean paper towel.
3. Place the ends of the hoses into an empty beaker.
4. Once the action is completed, select
Menu / Operation / Maintenance /
Decommissioning / Rinse analyzer must be selected.
5. Immerse all the hoses (RK, S1, P) in a beaker containing approx. 200 ml (6.76 fl.oz) of
distilled water in order to rinse the system with water.
6. Select Menu / Operation / Maintenance / Decommissioning / Sample collector / Empty
sample collector / Start must be selected.
 The system is automatically rinsed with sample and emptied. This process takes
approx. 4 minutes.
7. Remove the hoses from the beaker and dry them with a clean paper towel.
8. Select
Menu / Operation / Maintenance / Decommissioning / Rinse analyzer once again
to rinse the hoses with air.
9. The analyzer can now be disconnected from the mains supply.
13 Repair
13.1 General information
The repair and conversion concept provides for the following:
• The product has a modular design
• Spare parts are grouped into kits which include the associated kit instructions
• Only use original spare parts from the manufacturer
• Repairs are carried out by the manufacturer's Service Department or by trained users
• Certified devices can only be converted to other certified device versions by the
manufacturer's Service Department or at the factory
• Observe applicable standards, national regulations, Ex documentation (XA) and certificates
1. Carry out the repair according to the kit instructions.
2. Document the repair and conversion and enter, or have entered, in the Life Cycle
Management tool (W@M).
13.2 Spare parts
Device spare parts that are currently available for delivery can be found on the website:
www.endress.com/device-viewer
‣
Quote the serial number of the device when ordering spare parts.