Endress+Hauser Liquiline System CA80HA, Operating Instructions Manual

Page: 114 / 214

Operation Liquiline System CA80HA
114 Hauser
Outputting the status of a cleaning function
Function = Cleaning(for sensors)
Function Options Info
Assignments Selection
• None
• Depends on the type of
cleaning
Factory setting
None
Here you can specify how a cleaning function
should be displayed for the relay.
You have the following options depending on
the cleaning program that is selected (
Menu /
Setup / Additional functions / Cleaning :
• Cleaning type = Standard clean
Cleaning 1 - Water , Cleaning 2 - Water ,
Cleaning 3 - Water , Cleaning 4 - Water
• Cleaning type = Chemoclean
Cleaning 1 - Water , Cleaning 1 - Cleaner ,
Cleaning 2 - Water , Cleaning 2 - Cleaner ,
Cleaning 3 - Water , Cleaning 3 - Cleaner ,
Cleaning 4 - Water , Cleaning 4 - Cleaner
• Cleaning type = Chemoclean Plus
4x Cleaning 1 - %0V , 4x Cleaning 2 -
%0V
1)
Hold behavior Selection
• Freeze last value
• Fixed value
• Ignore
Factory setting
Ignore
Freeze last value
The device freezes the last measured value.
Fixed value
You define a fixed measured value that is
output at the output.
Ignore
A hold has no effect.
1) %0V is variable text which you can assign in Menu / Setup / Additional functions / Cleaning / Chemoclean Plus /
Output label 1 ... 4 .
Outputting the "Measurement active" system status and the information "Sample
required"
Function = Analyzer
Function Options Info
Signal type = Static signal
Assignments
Function = Analyzer
Selection
• None
• Sample required SP1
• Measurement active SP1
Factory setting
None
If this option is selected, information is output
as to whether a measurement is active on the
selected measuring channel or an action is
started that requires sample (measurement,
calibration or cleaning).