User Manual
Appendix H
GFK-1742F
Jan 2020
Using VersaPro with the DSM314
479
•
This item describes how to print your entire motion program file (block). While the
Motion Editor is active, click File on the Menu bar and select Print. The Printer dialog
box will display. Make any desired printer setup changes, then click the OK button.
Figure 238: Print Dialog Box
•
This item describes how to print just a selected portion of your motion
program/subroutine file. In the Motion Editor window, use your mouse to select the
portion you wish to print, click File on the Menu bar, then select Print. In the Print
dialog box (shown above), make sure the Selection radio button in the Print range
section is selected (has a dot in the middle). Click the OK button.
Print Report
•
To print all motion program blocks (if you have more than one) as part of a report
with the other information in the folder, click File on the Menu bar and select Print
Report. The Print Report dialog box will appear. Click the Blocks checkbox on the
Print Report dialog box. Make sure the All radio button is selected. (You can also
select other items and features for the report such as Table of Contents, Cross
References, Variables, etc.) Click the OK button to start printing. Motion program,
Local Logic, and Ladder Diagram blocks will be printed as part of this report.
•
To print only selected blocks, highlight them in the Folder Browser window. Click File
on the Menu bar and select Print Report. Click the Blocks checkbox, then choose the
Selected radio button. This limits the reports to only those blocks that you have
highlighted in the Folder Browser window.