User Manual
Chapter 10
GFK-1742F
Jan 2020
Introduction to Local Logic Programming
257
10.6.2
Checking Local Logic Syntax
At this point, you should validate the program to verify correct language syntax.
To check the language syntax, select Target, then Validate <Target Name>. You can also
press F7 anywhere in the Machine Edition window. All logic blocks in the active target are
checked. Results of syntax checking are displayed in the Feedback Zone. (If the Feedback
Zone is not already open, starting the Validate process opens it.)
In the following example, the line “First_Local_Logic_Sweep” is incorrectly typed as
“First_Local_Logic_Swee.”
Figure 122
Tip
To cycle through the warning and error messages in the Feedback Zone, press F4.
To go to the line that caused the error in the local logic program, double click the error
description in the Feedback Zone. The focus shifts to the Local Logic Editor window and the
cursor moves to the beginning of the line that has the error.
Chapter 12 contains details and corrective actions for syntax errors and warnings.