Remote Control EEC-0001
V1.0
Remote Control
Speed/Disable, LMI Function Cutout Override and Main Winch disable, Remote Start
Up, Lever Inactive Override, and Lever Speed Control. The large red button is the
Emergency Stop.
When the lever is in the center position, the function is inactive. Moving the lever
from the center position initiates function movement. Multiple functions can be operated
simultaneously with this system. Refer to these pictures and the descriptions of each
lever/switch operation below the drawing.
Elliott remote controls provide the operator with the same load and capacity
information to the operator using the remote controls as if they were operating from the
operator’s cap or platform. This provides the operator in the platform or at the hook
point with boom length, angle and load radius information along with allowable load and
actual load values.
Powering up the remote
To start using the remote control, this sequence must be followed to power up the
remote for use.
1.
Twist up the
Emergency Stop
button.
2.
Press the Power On button once; the LED power light above it will illuminate red.
Indicator Panel
At the top of the LCD screen are the
Indicator Panel lights. From left to right, the
Indicator Panel lights are:
Enable:
When the Enable switch is
engaged, this LED indicates the levers and
switches are operational.
Out Of Level:
This has a default
value of 15 ACR minutes, the unit creates
Summary of Contents for E190
