Elliott E190, Operation And Maintenance Manual

Page: 18 / 358

ANSI/SIA Weather EEC-0036 V1.2
Responsibilities per
ANSI/SIA A92.2
accordance with the manufacturer’s recommendations. Such intervals are
dependent upon component function and exposure to wear, deterioration and
other agents which adversely affect component life. Two classifications are
designated:
a. Frequent Inspection and Test: Daily to monthly intervals.
b. Periodic Inspection and Test: One to twelve month intervals.
3. Frequent Inspection and Test: Items determined by the owner in
accordance with the manufacturer'’ recommendations for each specific aerial
device shall be inspected for defects. The following tests and inspections
shall be performed by the operator once daily, prior to first use:
a. Operating controls and associated mechanisms for conditions interfering
with proper operation.
b. Visual and audible safety devices for malfunction.
c. Hydraulic or pneumatic systems for observable deterioration or excessive
leakage.
d. Fiberglass and other insulating components for visible damage or
contamination.
e. Missing or illegible operational and instructional markings.
f. Electrical systems of / or related to the aerial device for malfunction, signs
of excessive deterioration, dirt and moisture accumulation.
g. Visual inspection of bolts, pins, and other fasteners for loose, deformed or
missing fasteners and other locking devices.
Any suspected items shall be carefully examined or tested and a determination
made by a qualified person as to whether they constitute a safety hazard. All
unsafe items shall be replaced or repaired before use.
4. Periodic Inspection or Test: An inspection of the mobile unit shall be
performed at the intervals defined in B.2 depending upon its activity, severity
of service, and environment, or as specifically indicated below. (These
inspections shall include the requirements of B.3 ):
a. Structural members for deformation, cracks or corrosion.