Elliott E190, Operation And Maintenance Manual

Page: 17 / 358

ANSI/SIA Weather EEC-0036 V1.2
Responsibilities per
ANSI/SIA A92.2
the Qualification test requirements of 5.3.2 by either obtaining certification of the
test and performing a periodic test after installation, or by performing the
Qualification test.
F. Quality Assurance: The installer shall have a documented quality assurance
program which will ensure compliance with this standard.
G. Welding: All welds made by the installer, whose failure could result in motion of
the platform(s) shall meet the Structural Welding Code AWS DI.I-98 and AWS
DI.2-98 . The installer shall establish applicable welding quality assurance
procedures for all weldments.
H. Training: The dealer or installer shall offer training or training materials that aid
owners and users in the operation, inspection, testing and maintenance of the
aerial device. This training shall be offered initially and subsequently on request.
I. Dealer or Installer as Use r : Whenever a dealer or installer directs personnel to
operate an aerial device (inspecting, sales demonstrations, or any form of use),
the dealer or installer shall assume the responsibilities of users as specified in
Section 9 of this standard. All personnel authorized to operate the aerial device
shall have been trained.
Responsibilities of Owners
A. General Responsibilities: Each owner shall comply with the requirements of
this section. The following responsibilities pertain to the owner’s inspection,
testing, maintenance, modification, training, and transfer of ownership. These
activities shall be performed by qualified person(s).
B. Inspection and Testing Classifications
1. Initial Inspection and Test: Prior to initial use, all new or modified mobile
units shall be inspected and tested to ensure compliance with the provisions
of this standard. Verification by the manufacturer, the installer or an
equivalent entity(s), meets this requirement.
2. Regular Inspection and Tests: The inspection procedure for mobile units is
divided into two classifications based upon the intervals at which inspections
and tests shall be performed. Intervals shall be set by the owner in