Elliott E190, Operation And Maintenance Manual

Page: 203 / 358

Five Section Boom Operation-aerial EEC-0080 V1.3
Five Section Boom Operation
D. Torque the 5/4/3 retract cables to ft-lb (8.13 N.m) each. Use the flats at the front of
the cable ends to keep the cables from rotating while torqueing. These cables are
located at the bottom tip of the 3
rd
section boom.
E. Torque the 3/4/5 extend cables to 15 ft-lb (20.37 N.m) each. These cables are
located at the top base of the 3
rd
stage boom. ( Reference Step C for access to the
3/4/5 extend cables. )
F. Torque the 4/3/2 retract cables to 7 ft-lb (9.5 N.m). Use the flats at the front of the
cable ends to keep the cables from rotating while torqueing. These cables are
located at the bottom tip of the 2
nd
section boom.
G. Torque the 2/3/4 extend cables to 20 ft-lb (27 N.m) each. These cables are located
at the top base of the 2
nd
section boom. (Reference step C for access to the 2/3/4
extend cables).
H. Torque the 3/2/1 retract cables to the 9ft-lb (12 N.m). Use the flats at the front of the
cable ends to keep the cables from rotating while torqueing. These cables are
located at the bottom tip of the 1
st
section boom.
3/4/5 Extend Cables
5/4/3 Retract Cables
1
st
Section 2
nd
Section 3
rd
Section 4
th
Section 5
th
Section