Docomo FOMA P704i, Manual

Page: 416 / 495

414
Appendix/External Devices/Troubleshooting
Select “Software update” from the setting menu and enter your Terminal Security Code; then you can confirm
the reserved time.
You can change or cancel the reserved date and time from the display for checking reservation.
To change, select “Change”. To cancel, select “Cancel”.
If you select “NO” or “Cancel” from each display, the display for ending the operation appears.
Select “YES”; then the software update ends and the Stand-by display returns. To return to the previous display, select “NO”.
Regarding data and programs downloaded or obtained from sites, i-mode mail messages or SMS messages to
the FOMA phone, you can detect data that might cause failure, can delete it, and can stop starting an
application program.
p Use the pattern data for checking. Update the pattern data, because it is upgraded each time new trouble is found. (See
page 415)
p The scan function is for filtering out the data that causes failure to mobile phones at the time of browsing web pages or
receiving mail messages. Note that this function works only when the pattern data for each failure has been downloaded to
your mobile phone and when the pattern data for each failure is found.
p
The data contained in the pattern data varies depending on the mobile phone model. Therefore, note that we may stop
distributing the pattern data to mobile phones that have been on the market for three years or more.
If you set “Scan” to “Valid”, data or a program is automatically checked when you try to run it.
In addition, if you set “Message scan” to “Valid”, a received SMS message is automatically checked when you
display it.
1
m
Settings Lock/Security Scanning function Set scan
Select an item.
Scan . . . . . . . . . . . . . . Sets whether to run the scanning function.
Message scan . . . . . . Sets whether to run the scanning function when displaying
an SMS message.
p
While “Scan” is set to “Invalid”, you cannot set “Message scan”.
2
Valid or Invalid YES
p When the scan function is set, an alert is shown by five levels if data that might cause failure is detected. (See
page 416)
Check, Change, or Cancel the Reserved Date and Time
End Software Update
Information
p
If the battery level points “ ” during operation, the software downloading or rewriting is not done and the operation ends.
Scanning Function
Protecting FOMA Phone from Data Causing Failure
First of all, update the pattern data to make it the latest.
Set Scanning Function <Set Scan>
Setting at purchase Scan: Valid Message scan: Valid
< >