Docomo FOMA P704i, Manual

Page: 296 / 495

294
Data Display/Edit/Management
You can display the used and unused memory space
(estimate) on the microSD memory card.
p See page 266 for checking the used memory space for the
still images or moving images.
1
m
LifeKit SD-PIM
i
( )
microSD info
By connecting the microSD memory card to the
microSD memory card adapter, you can use the
microSD memory card on a personal computer which
supports SD memory card.
The microSD memory card adapter is available at
mass retailers for home electric appliances etc.
For installing the microSD memory card adapter,
refer to the instruction manual for the microSD
memory card adapter.
p When you execute Check microSD, the microSD
memory card may not be recovered correctly, the data
existed before executing Check microSD may be
deleted, or the microSD memory card itself may be
initialized depending on the condition of the microSD
memory card.
p If you press
l
( ) or
h
, or receive a voice
call or videophone call during Check microSD, Check
microSD is canceled.
p If you cancel Check microSD midway, data not
recovered may remain. In this case, try Check microSD
again.
p
It may take long to complete Check microSD depending
on the data volume stored on the microSD memory card.
microSD Info
Displaying Capacity of
microSD Memory Card
Information
< >
Information
p As the microSD memory card contains the system files
for the card, the memory space is smaller than that
described on the microSD memory card even if it
contains no data.
Using a microSD Memory Card
with a Personal Computer
With a microSD memory card inserted, connect the
FOMA phone to a personal computer; then you can
read the data from or write the data onto the microSD
memory card.
The following equipment is required:
p Connector Cable: FOMA USB Cable (option)
p Personal Computer: Personal computer having the USB
port (Universal Serial Bus Specification Rev 1.1 compliant)
that can be connected with the FOMA USB Cable (option)
p Compatible Operating Systems: Windows 2000, Windows
XP, Windows Vista (Japanese version in each)
1
m
Settings Other settings
USB mode setting microSD mode
p
When you set to “microSD mode”, “ ” appears on
the Stand-by display.
p To save WMA files from your personal computer to
the microSD memory card, set to “MTP mode”.
When you set to “MTP mode”, “ ” appears on the
Stand-by display.
p
To use the FOMA phone for packet communication,
64K data communication, data sending/receiving
(OBEX), and for calls with USB Hands-free compatible
device, set mode to “Communication mode”.
2
Connect the FOMA phone to a personal
computer using the FOMA USB Cable
(option).
The personal computer recognizes the microSD
memory card.
p
“ ” appears on the Stand-by display. Also, “ ” is
displayed while the microSD memory card is inserted.
Use FOMA Phone as microSD Reader/Writer
Setting at purchase Communication mode
Information
p
If the FOMA phone and personal computer are not
correctly connected, or the remaining battery level of the
FOMA phone shows very low or goes flat, you cannot
send or receive data. In addition, you may lose data.
p While data is being read or written, do not pull the FOMA
USB Cable off. Not only you cannot send or receive data,
but also you may lose the data.
p
While data is being read or written, you cannot set this
function. Further, make sure that you do not “Reset
settings” or “Initialize” during reading/writing. Malfunction
of the microSD memory card could result.
p You cannot read from/write to a personal computer while
reading from/writing to the FOMA phone, and vice versa.
p To use the DoCoMo keitai datalink, use it in
“Communication mode”.