Docomo FOMA P704i, Manual

Page: 455 / 495

18
The operation below explains how to set a connection
for packet communication without using the “FOMA PC
setup software”.
The packet communication uses AT commands to carry
out the settings from a personal computer. To specify
settings, communication software to enter AT command
is required. “Hyper Terminal”, which is attached to
Windows as the standard software, is used here for
explanation.
When using DoCoMo Internet access service “mopera
U” or “mopera”, you do not need to set an access point
name (APN) (see page 19).
You can set “caller ID notified/not notified” (see
page 21) as required. (You need to set “caller ID
notified” when using “mopera U” or “mopera”.)
<Packet communication setting flow using AT commands>
To manually carry out the communication setting, you
need to specify a COM port number, which is assigned
to “FOMA P704i” (modem) embedded after you install
the “P704i communication setup file” (driver).
The confirmation method varies depending on the
operating system of your personal computer.
p
When using DoCoMo Internet access service “mopera U” or
“mopera”, you do not need to set an access point name (APN);
therefore, you do not need to confirm the modem.
Setting Dial-up Network
Set Packet Communication
Confirm the COM port number (See page 18)
Start the communication software that enables the entry of AT commands
(See step 3 of “Set an Access Point Name (APN)” on page 19)
Set an access point name (APN) (See step 7 on page 20)
Set “caller ID notified/not notified”
(See step 2 on page 21)
Set others (See page 45)
Exit the communication software (See step 9 on page 20)
■
AT commands
p The AT commands are used to control a modem. The FOMA phone,
which conforms to the AT commands, supports some extended
commands and unique AT commands.
p By entering AT commands, you can carry out detailed setting for packet
communication and FOMA phone, and confirm (display) the setting
contents.
p If the entered AT command is not displayed, enter “ATE1 ”.
Confirm COM Port Number
1
“
スタート
(Start)” Open “
コントロールパネル
(Control panel)”.
2
From “ プリンタとその他のハードウェア
(Printer and the other hardware)” in “ コント
ロールパネル (Control panel)”, open “ 電話とモ
デムのオプション (Phone and modem
options)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番/エリアコード
(City code/Area code)”, then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access
point)” field of “FOMA P704i”, then click
“OK”.
p The COM port number you confirmed is used to set an access
point name (APN) (see page 19).
p
The contents on the property display and COM port number vary
depending on the personal computer you use.
For Windows XP