Docomo FOMA P704i, Manual

Page: 445 / 495

8
To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication.
Using the “FOMA PC setup software”, you can easily set
up dial-up, communication setup optimization, and
access point name (APN).
p
Operate as the user who has the PC administrator right.
Before installing the “FOMA PC setup software”, you
need to register the “P704i communication setup files”
(driver) correctly on the device of the personal
computer. (See page 6)
Installing FOMA PC Setup Software
Notes for Installing FOMA PC Setup
Software
Confirm that the FOMA phone is correctly
recognized by your personal computer
■ When you connect the FOMA phone to your personal computer
for the first time
The wizard shown below starts.
To use the FOMA data communication, you need to register the FOMA
phone in your personal computer as a communication device.
See page 4 through page 6 for installation of the “P704i communication
setup files” (driver).
The explanation here uses the displays for when
installing the FOMA PC setup software on Windows XP.
The displays are slightly different depending on the
personal computer you use.
1
Set the provided “FOMA P704i CD-ROM” into
your personal computer.
2
To install the “FOMA PC setup software”,
click “ データリンクソフト・各種設定ソフト
(Data link software/Setup software)”.
The recommended environment that the Menu operates is
Microsoft
®
Internet Explorer 6.0 or later. When the personal
computer you use does not satisfy the recommended environment
or when the Menu does not appear after you set the CD-ROM,
operate as follows:
Refer to the CD-ROM from “
マイコンピュータ (My computer)”, then
double-click “setup_4.0.0.exe” in the “FOMA_PCSET” folder. Go to
step 4.
p If this display appears during installation of the “FOMA PC setup
software”, close the display.
3
Click “ インストール (Install)” under “FOMA PC
設定ソフト (FOMA PC setup software)”.
Install FOMA PC Setup Software