Docomo FOMA P704i, Manual

Page: 471 / 495

34
The packet communication is a communication system
you are charged according to the amount of data you
sent and received, regardless of the communication
time and distance. (Maximum download speed: 384
kbps, Maximum upload speed: 64 kbps)
You can use the DoCoMo Internet access service,
“mopera U”/“mopera”.
1
Click “
かんたん設定
(Easy Setting)”.
2
Select “
パケット通信
(Packet
communication)”, then click “
次へ
(Next)”.
Confirm that “ パケット通信 (Packet communication)” is checked,
then click “
次へ
(Next)”.
3
Select “
『
mopera U
』への接続
(Connect to
mopera U)” or “ 『 mopera 』への接続 (Connect
to mopera)”, then click “ 次へ (Next)”.
To use “mopera U”, select “
『
mopera U
』への接続
(Connect to
mopera U)”. To use “mopera”, select “ 『 mopera 』への接続 (Connect
to mopera)”.
When “
『
mopera U
』への接続
(Connect to mopera U)” is selected,
the confirmation display appears asking whether you have signed up
for it. If you have signed up, click “
はい (YES)”.
p
See page 35 for using a provider other than “mopera U” or
“mopera”.
4
Click “OK”.
p
The system obtains the access point name (APN) setting from the
FOMA phone connected to the personal computer. Wait for a
while.
Select Packet Communication from
“
かんたん設定 (Easy Setting)”
Using “mopera U” or “mopera” as an access point
5
Enter an access point name, then click “ 次へ
(Next)”.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名 (Access point name)” field.
p
You cannot enter the following half-pitch characters:
¥, /, :,
_ , ?, !, <, >, |, and ”.
p For this FOMA phone, select “PPP 接続 (PPP connection)” for “ 接
続方式 (connection type)” because it supports only the PPP
connection.
p Set whether to notify your caller ID for dial-up connection. You
need to notify your caller ID for connecting to “mopera U” or
“mopera”. Select “
設定しない
(not set)” or “186
を付加する
(add
186)”.
6
Click “ 次へ (Next)”.
If the access point is “mopera U” or “mopera”, you can connect even
if the “
ユーザ名 (user name)” and “ パスワード (password)” fields are
blank.
p Select a user optionally.
7
Confirm the set information, then click “ 完了
(Complete)”.
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click “
完了 (Complete)”.
p To change the set contents, click “ 戻る (Back)”.
p
If “
デスクトップにダイヤルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)” is checked, a dial-up
shortcut will be created on the desktop.
8
Click “OK”.
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 37)