Docomo FOMA P704i, Manual

Page: 460 / 495

23
13
Click the “ 全般 (General)” tab to confirm the
setting contents.
When two or more modems are connected to your personal
computer, confirm that “
モデム (Modem) - FOMA P704i” is checked
in the “
接続方法
(Connection method)” field. If it is not checked,
check it. If two or more modems are checked, click the button
to position the priority level of “ モデム (Modem) - FOMA P704i” to
the top or uncheck modems other than “ モデム (Modem) - FOMA
P704i”.
When “
ダイヤル情報を使う
(Use dial information)” is checked,
uncheck it.
p The COM port number allocated to “FOMA P704i” varies
depending on the personal computer you use.
p When connecting to “mopera U”, enter “ _ 99 ___ 3#” as the
access point number.
See page 20 for access point numbers other than “mopera U”.
14
Click the “ ネットワーク (Network)” tab, then
carry out respective settings.
In the “ 呼び出すダイヤルアップサーバーの種類 (Type of calling
dial-up server)” field, select “PPP: Windows 95/98/NT4/2000,
Internet”.
In the “
この接続は次の項目を使用します (Use the following items
for this connection)” field, select “ インターネットプロトコル (TCP/
IP) [Internet protocol (TCP/IP)]”.
You cannot modify the setting of the “QoS
パケットスケジューラ
(QoS packet scheduler)” field; so use the default setting as it is.
Next, click “
設定 (Setting)”.
Contact your ISP (Internet service provider) or network administrator
for how to set up TCP/IP to connect to a general ISP and so on.
15
Uncheck all the items, then click “OK”.
16
Return to the display in step 14, then click
“OK”.
1
“ スタート (Start)” “ プログラム (Programs)”
“ アクセサリ (Accessories)” “ 通信
(Communications)” Open “ ネットワークとダ
イヤルアップ接続 (Network and dial-up
connections)”.
2
Double-click “
新しい接続の作成
(Create a new connection)” in
“
ネットワークとダイヤルアップ
接続
(Network and dial-up
connections)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番
(City code)”,
then click “OK”.
p The “ 所在地情報 (Address information)” display appears only
when you first start “
新しい接続の作成
(Create a new connection)”
in step 2.
p At the second time or after, the “ ネットワークの接続ウィザード
(Network connection wizard)” display appears instead of this
display. Go to step 5.
4
When “ 電話とモデムのオプション (Phone and
modem options)” appears, click “OK”.
5
When the “ ネットワークの接続ウィザード
(Network connection wizard)” display
appears, click “ 次へ (Next)”.
6
Select “ インターネットにダイヤルアップ接続す
る (Dial-up connect to the Internet)”, then click
“ 次へ (Next)”.
Set Dial-up Network for Windows 2000