Docomo FOMA P704i, Manual

Page: 250 / 495

248
i-
α
ppli
5
Put a check mark for the days of the week
to be set
l
( )
6
Press
l
( ).
You can check whether a software program has
started automatically and properly. Also, you can
check the information of start failure from IC card. Up
to three records of automatic start and a record of
start failure from IC card are stored.
1
m
i-
α
ppli
i α
ppli info
Auto start info
StartO . . . . . Started automatically and properly.
StartX . . . . . Did not start automatically.
When “ ” is displayed, you can
press
O
o
( ) to start the software
program.
Start– . . . . . Has not started yet.
Auto Start Info
Auto Start Info display
Information
p Software programs do not start automatically in the
following cases:
・
When the FOMA phone is turned off
・
When the date and time are not set
・ When another function is working
・ During Lock All or Personal Data Lock
・ While animation/Flash movie is being played back
・ When the time set for automatic start is identical to the
reserved time set for “Software update”, or the time set
for an alarm of “Alarm”, “Schedule” or “ToDo”
・
When a start time has been specified to the same
software program within 10 minutes from the previous
auto-start
p If automatic start fails, “ ” appears on the desktop.
Select the icon to bring up the Auto Start Info display.
You can set an i-
α
ppli program for the Stand-by
display. Once set, the i-
α
ppli Stand-by display
automatically appears each time you bring up the
Stand-by display.
1
Software List/IC Card List
i
( )
Software setting Stand-by set
ON or OFF
2
Press
l
( ).
“ ” is displayed for the software program set as the
Stand-by display. “ ” or “ ” is displayed while an
i-
α
ppli Stand-by display is running.
i-
α
ppli Stand-by Display
Operating i-
α
ppli Stand-by Display
Software Setting (Stand-by Set)
< >
■ To operate an i-
α
ppli program as a normal i-
α
ppli
program when an i-
α
ppli Stand-by display is running
From the i-
α
ppli Stand-by display, press
r
.
“ ” or “ ” changes to a blinking “ ” or “ ” and
then you can operate the i-
α
ppli program as a normal one.
p To return to the i-
α
ppli Stand-by display, press and hold
r
for at least one second or press
h
; then select
“Ended”. To release the i-
α
ppli Stand-by display, select
“Terminated”, and select “YES”.
Information
p
If you turn off the FOMA phone while the i-
α
ppli Stand-by
display is running, the confirmation display appears
asking whether to start the i-
α
ppli program when you turn
on the power again.
p You can set only one software program for the i-
α
ppli
Stand-by display.
p
Some i-
α
ppli programs cannot be set for the Stand-by
display.
p Note that you might not be able to receive timely
information if you have set “Software setting (Stand-by
net)” to “OFF”.
p You cannot use the Web To function and the Phone To/
AV Phone To function from the i-
α
ppli Stand-by display.
p
If the software program which connects to the network is
set for the i-
α
ppli Stand-by display, it might not operate
successfully because of radio wave conditions or other
factors.
Information
p
With some software programs set as the i-
α
ppli
Stand-by display, you can press a key to go from the
normal i-
α
ppli status to the i-
α
ppli Stand-by display
status. However, you cannot return to the i-
α
ppli
Stand-by display if another menu function is operating.