Docomo FOMA P704i, Manual

Page: 302 / 495

300
Data Display/Edit/Management
You can use the FOMA phone as a TV remote-controller
by starting the i-
α
ppli program.
p To use remote-control devices, you may need to download
the software program for those devices. [The pre-installed
“G ガイド番組表リモコン (G Guide Program List
Remote-controller)” supports the infrared remote-controller
function.] The key operation for the remote-controller
differs depending on the software program.
p
This function does not work with some devices.
p Communication might be affected by compatible devices
and the ambient light.
p You cannot use the infrared remote-controller during Self
Mode.
p
Turn the FOMA phone’s
Infrared data port to the front
of a device to be operated.
You can operate within
about 4 meters away from
the device.
p The radiation angle of the
infrared rays is within
±
15°
from the center.
For when you forward Phonebook entries using
infrared rays, iC communication, SD-PIM, or DoCoMo
keitai datalink, you can specify whether to forward
the stored still images together.
1
m
Phonebook Phonebook settings
Forwarding image ON or OFF
Using Infrared
Remote-controller Function
Infrared Remote-controller
+ m - 2 - 6
Forwarding Image
Communication Setting
Setting at purchase ON
Within about
4 meters
Infrared data port
Within ± 15°
from the center
< >
iC communication is the function that enables you to
send/receive data files to/from another FOMA phone
using the FeliCa reader/writer function.
You can send/receive data files by overlapping the
FeliCa “
” mark of your FOMA phone with that of
another FOMA phone supporting the iC communication
function.
p The type of files and conditions of forwarding are the same
as those of infrared data exchange. (See page 297)
However, you cannot send multiple files at a time.
p
The Camera Mode indicator flickers during iC
communication.
p
You cannot execute iC communication while “IC card lock”
is activated.
If you have difficulty in sending/receiving data files, overlap
the FeliCa mark “ ” at the other end with the center area
of the display of your P704i.
You can send/receive the data files one by one using
iC communication.
p See “ ■ Notes on sending/receiving” on page 298 as well.
p You cannot use this function during charging.
1
Display of the data to be sent
i
( ) transmission
p
To send a Phonebook entry, select
“ transmission” from the Function menu and
select “Send phonebook”.
iC Transmission
About iC Communication
< >
Sending/Receiving One Data File
Send One Data File