Docomo FOMA P704i, Manual

Page: 336 / 495

334
Other Convenient Functions
You can confirm the last and accumulated call duration
and cost for voice calls and videophone calls.
p
Displayed call duration and cost are for reference and
might differ from the actual ones. In addition, the
consumption tax is not included in the call cost.
p
Both the voice call duration and digital communications
duration (videophone call du 64K data
communication duration) are displayed and both incoming
and outgoing calls are included in the duration.
p The call cost is for the outgoing calls only. However, “¥0” or
“¥
__ ” is displayed for toll free calls such as Free Dial or
for Directory Assistance Service (104), etc.
p The call cost is accumulated on the UIM. Therefore, when
you replace the UIM, the charge accumulated on the UIM
in use is displayed. (accumulation from December 2004)
※ You cannot display the accumulated cost on the UIM
using the FOMA phones that were released before the
901i series. (The cost is accumulated on the UIM.)
p You can reset the displayed call duration and call cost.
1
m
Settings Call time/cost Call data
Last call duration
Talk: Displays the call duration of the latest voice
call.
VP: Displays the call duration of the latest
videophone call.
Digital: Displays the call duration of the latest
64K data communication.
Last call cost
Talk: Displays the call cost for the latest voice call.
VP: Displays the call cost for the latest
videophone call.
Digital: Displays the call cost for the latest 64K
data communication.
Total calls duration
Talk: Displays the call duration of voice calls from
the time Reset Total Duration was
executed to the current time.
VP: Displays the call duration of videophone calls
from the time Reset Total Duration was
executed to the current time.
Digital: Displays the call duration of 64K data
communication from the time Reset Total
Duration was executed to the current
time.
Total calls
Displays the call cost from the time Reset Total Cost
was executed to the current call.
Calls reset
Displays the date and time when Reset Total
Duration was executed last time.
Cost reset
Displays the date and time when Reset Total Cost
was executed last time.
+ m - 6 - 1
Call Data
Checking Call Duration and Cost
< >
1
m
Settings Call time/cost
Reset total cost&dura.
Enter your Terminal Security Code
Do the following operations.
You can set the call cost limit for Total Calls and can
be notified when it is exceeded. If you set “Auto reset
setting” to “ON”, the call cost is reset at midnight on
the 1st of the month and “
” is deleted.
1
m
Settings Call time/cost
Notice call cost
Enter your Terminal Security Code
ON or OFF
Information
p When Last Call Duration exceeds “19 hours 59 minutes
59 seconds”, or Total Calls Duration exceeds “199 hours
59 minutes 59 seconds”, “0 s” returns to re-count the time.
p
If you switch between the voice call and videophone call
during a call, the call duration and call cost are counted
respectively for the calls. You are not charged while
“Changing” (see page 51) is displayed.
p The duration/charge for i-mode communication and
packet communication are not counted. For how to check
the i-mode fee, refer to “Mobile Phone User’s Guide [i-
mode]” which is supplied on your i-mode contract.
p
The charge for Chaku-moji is not counted.
p
The international call fee for using WORLD CALL is
counted. The fees for using other international call
services are not counted.
p The duration for ringing and calling is not counted as call
duration.
p If you turn off the power or remove the UIM, Last Call Duration
is reset to “0 s”; and Last Call Cost is reset to “¥ __ ”.
+ m - 6 - 0
Reset Total Cost&Duration
Resetting Total Duration/Total Cost
< >
Item Operation/Explanation
Reset total
duration
You can reset Last Call Duration and Total
Calls Duration to “0 s”.
YES
Reset total
cost
You can reset Last Call Cost and Total
Calls to “¥0”.
YES Enter the PIN2 code.
p
See page 129 for PIN2 code.
Notice Call Cost
Setting Call Cost Limit
Setting at
purchase
Notice call cost: OFF
Max cost: ¥0 (when “Notice call cost” is set to “ON”)
Method to alert: Icon (when “Notice call cost” is set to “ON”)
Auto reset setting: OFF (when “Notice call cost” is set to “ON”)
< >