Docomo FOMA P704i, Manual

Page: 472 / 495

35
The packet communication is a communication system
you are charged according to the amount of data you
sent and received, regardless of the communication
time and distance. (Maximum download speed: 384
kbps, Maximum upload speed: 64 kbps)
To use a provider other than “mopera”, you may need to
separately apply for the service and sign a contract with
the provider.
1
Click “ かんたん設定 (Easy Setting)”.
2
Select “ パケット通信 (Packet
communication)”, then click “ 次へ (Next)”.
Confirm that “ パケット通信 (Packet communication)” is checked,
then click “
次へ
(Next)”.
3
Select “
その他
(Others)”, then click “
次へ
(Next)”.
Confirm that “ その他 (Others)” is checked, then click “ 次へ (Next)”.
4
Click “OK”.
p The system obtains the access point name (APN) setting from the
FOMA phone connected to the personal computer. Wait for a
while.
5
Enter an access point name.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名
(Access point name)” field.
p You cannot enter the following half-pitch characters:
¥, /, :,
_ , ?, !, <, >, |, and ”.
p In the “ 接続先 ( APN ) の選択 [Select an access point name (APN)]”
field, “mopera.ne.jp (PPP 接続 ) [mopera.ne.jp (PPP connection)]”
is displayed as the default. Go to the “
接続先 (
APN
) 設定
[Set an
access point name (APN)]” display.
p Set whether to notify your caller ID for dial-up connection. For the
setting of the caller ID notification, follow the instructions from the
provider you use.
Using a provider other than “mopera U” or
“mopera” as an access point
6
Click “ 接続先 (APN) 設定 [Set an access point
name (APN)]”.
“mopera.ne.jp” is registered in “cid1” and “mopera.net” is registered in
“cid3” by default. Click “
追加
(Add)”, then enter the correct access
point name (APN) for FOMA packet communication on the “ 接続先
(APN) の追加 [Add an access point name (APN)]” display. Click “OK”.
The “ パケット通信設定 (Packet communication setting)” display
returns. Select the access point name (APN) you specified newly. If it
is ok, click “OK”.
p For this FOMA phone, select “PPP 接続 (PPP connection)” for “ 接
続方式
(connection type)” because it supports only the PPP
connection.
For a provider access point name (APN) or supported connection
types, contact your provider.
7
Click “ 詳細情報の設定 (Set detailed information)”.
The display for specifying “ IPアドレス (IP address)” and “ ネーム
サーバ ー (name server)” appears. When entering dial-up
information for the provider you have subscribed or Intranet LAN
system, specify addresses according to the entry instruction
information, then click “OK”.
8
Click “ 次へ (Next)”.
9
Specify “ ユーザー名 (User name)” and “ パス
ワ ード (Password)”, then click “ 次へ (Next)”.
When specifying the user name and password, correctly enter the
information supplied from your Internet service provider, taking care
of uppercase and lowercase letters and so on.