Docomo FOMA P704i, Manual

Page: 477 / 495

40
The operation below explains how to set a connection
for packet communication without using the “FOMA PC
setup software”.
The packet communication uses AT commands to carry
out the settings from a personal computer. To specify
settings, communication software to enter AT command
is required.
When using DoCoMo Internet access service “mopera
U” or “mopera”, you do not need to set an access point
name (APN) (See page 41).
You can set “caller ID notified/not notified” (see
page 41) as required. (You need to set “caller ID
notified” when using “mopera U” or “mopera”.)
<Packet communication setting flow using AT commands>
Setting Dial-up Network
Set Packet Communication
Confirm the COM port number
Start the communication software that enables the
entry of AT commands
Set an access point name (APN)
Set “caller ID notified/not notified”
Set others
Exit the communication software
■ AT commands
p The AT commands are used to control a modem. The FOMA phone,
which conforms to the AT commands, supports some extended
commands and unique AT commands.
p By entering AT commands, you can carry out detailed setting for packet
communication and FOMA phone, and confirm (display) the setting
contents.
p If the entered AT command is not displayed, enter “ATE1 ”.
To manually carry out the communication setting, you
need to specify a COM port number, which is assigned
to “FOMA P704i” (modem) embedded after you install
the “P704i communication setup file” (driver). The
confirmation method varies depending on the operating
system of your personal computer.
p When using DoCoMo Internet access service “mopera U” or
“mopera”, you do not need to set an access point name (APN);
therefore, you do not need to confirm the modem.
1
“ [ スタート (Start)]” Open “ コントロー
ルパネル (Control panel)”.
2
From “
ハードウェアとサウンド
(Hardware and
sound)” in “
コントロールパネル
(Control
panel)”, open “
電話とモデムのオプション
(Phone and modem options)”.
3
If the “ 所在地情報 (Address information)”
display appears, enter “ 市外局番/エリアコード
(City code/Area code)”, then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access
point)” field of “FOMA P704i”, then click
“OK”.
p
The COM port number you confirmed is used to set an access
point name (APN) (see page 41).
p The contents on the property display and COM port number vary
depending on the personal computer you use.
p Windows Vista does not support “Hyper Terminal”. For Windows
Vista, set by using a software program which supports Windows
Vista. (Follow the settings of the software program you use.)
Confirm COM Port Number