Docomo FOMA P704i, Manual

Page: 255 / 495

253
Osaifu-Keitai/ToruCa
You can start the Osaifu-Keitai compatible i-
α
ppli
from the Software List or IC Card List. By using
Osaifu-Keitai compatible i-
α
ppli, you can read/write
the data inside the IC card and use convenient
functions such as depositing electronic money or
traffic tickets, or checking your account for the
balance and usage details on the mobile phone.
p Take care of your Terminal Security Code and password
used for each service not to reveal to anyone.
p
When you start or download the Osaifu-Keitai compatible
i-
α
ppli program for the first time, the message “Use IC card
for current UIM?” appears. When you select “YES”, you
cannot use the IC card function afterward unless you insert
the same UIM.
To use the IC card function with another UIM, insert the
currently supported UIM first and then deleted all the
Osaifu-Keitai compatible i-
α
ppli programs. Otherwise, you
cannot use it.
p
Reading and writing data from the software program and to
the IC card is suspended in the following cases:
In that case, the read or written data is discarded. The
operation after the communication ends differs depending
on the service you use.
・ When a call comes in while i-
α
ppli is running
・ When the battery goes flat
1
Stand-by display
i
(for at least one
second) Select an Osaifu-Keitai
compatible i-
α
ppli program.
The Osaifu-Keitai compatible i-
α
ppli program starts up.
Starting Osaifu-Keitai
Compatible i-
α
ppli
Read and Write Data inside the IC Card
Place the FeliCa mark “ ” of the FOMA phone over
the scanning device, and you can use the FOMA
phone as electronic money to pay for shopping or to
use it as a traffic ticket. This function is available
without starting the software program.
p
During a call or i-mode connection, you can use Osaifu-
Keitai by placing the FeliCa mark over the scanning
device, however, you cannot start the Osaifu-Keitai
compatible i-
α
ppli.
1
Place the FeliCa mark “ ” of the FOMA
phone over the scanning device to use
the target service.
p The Camera Mode indicator lights in red when you
bring your FOMA phone close to a scanning device
and communication becomes ready.
Use Osaifu-Keitai
Information
p Mount the battery pack to use Osaifu-Keitai. Even when
the power is turned off or when the battery has gone flat,
you can use Osaifu-Keitai by placing the FeliCa mark
over the scanning device, however, you cannot start the
Osaifu-Keitai compatible i-
α
ppli. You might not be able to
use Osaifu-Keitai if you have left the battery unused for a
long period or not charged it after the low battery alarm
sounds. Charge the battery.
p Osaifu-Keitai compatible i-
α
ppli might start when you
place the FOMA phone over the scanning device.
Place the FeliCa
mark “ ” near the
earpiece over the
scanning device (in
the direction of A).
If it is not recognized,
move it in the
direction of B.