Docomo FOMA P704i, Manual

Page: 349 / 495

347
Character Entry
When you press two numeric keys to enter two-digit
numerals, a character (symbol) that corresponds to
the numerals is entered. Press the first key to list
candidate characters (symbols) at the lower part of
the display. To list candidate characters, you need to
set “2/NIKO-touch guide” to “ON” in advance.
p See page 386 for how characters are assigned to the
numeric keys (2-touch).
p See page 340 for switching to “2-touch”.
Press
l
( ) from the Character Entry (Edit)
display to switch input modes. You might not be able
to switch to some modes depending on the function
you enter.
<Example> Enter “
タダの菓子
” into a free memo.
1
m
Stationery Free memo
<Not recorded>
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/
Hiragana input mode.
た→
41
だ→
41
,
a
の→
55
か→
21
し→
32
p To enter “ ゛ ” or “ ゜ ”, enter the character and then
press
a
.
p Press
80
to switch between uppercase and
lowercase. You can switch uppercase and lowercase
also by entering the character that can be switched
between uppercase and lowercase and pressing
d
.
After entering hiragana characters, go to step 3 on
page 340.
Mode 2 (2-touch)
Entering Characters in Mode 2
(2-touch)
Switch Input Modes (2-touch)
Enter Characters
< >
When you press two numeric keys to enter two-digit
numerals, a character (symbol) that corresponds to
the numerals is entered. Press the first key to list
candidate characters (symbols) at the lower part of
the display. To list candidate characters, you need to
set “2/NIKO-touch guide” to “ON” in advance.
p See page 387 for how characters are assigned to the
numeric keys (NIKO-touch).
p See page 340 for switching to “NIKO-touch”.
Press
l
( ) from the Character Entry (Edit)
display to switch input modes. You might not be able
to switch to some modes depending on the function
you enter.
<Example> Enter “
タダの菓子
” into a free memo.
1
m
Stationery Free memo
<Not recorded>
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/
Hiragana input mode.
た→
41
だ→
41
,
a
の→
55
か→
21
し→
32
p To enter “ ゛ ” or “ ゜ ”, enter the character and then
press
a
.
p Enter the character that can be switched between
uppercase and lowercase and press
d
; then you
can switch.
After entering hiragana characters, go to step 3 on
page 340.
Mode 3 (NIKO-touch)
Entering Characters in Mode 3
(NIKO-touch)
Switch Input Modes (NIKO-touch)
Enter Characters
< >