Docomo FOMA P704i, Manual

Page: 456 / 495

19
1
“
スタート
(Start)” “
設定
(Setting)” Open
“
コントロールパネル
(Control panel)”.
2
Open “ 電話とモデムのオプション (Phone and
modem options)” in “ コントロールパネル
(Control panel)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番
(City code)”,
then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access
point)” field of “FOMA P704i”, then click
“OK”.
p The COM port number you confirmed is used to set an access
point name (APN) (see page 19).
p
The contents on the property display and COM port number vary
depending on the personal computer you use.
The operation below explains how to set an access
point name (APN) for packet communication. You can
register up to 10 access point names (APNs), which are
managed with cid1 to cid10 (see page 20).
When using “mopera U” or “mopera”, you do not need
to set the access point name (APN).
The operation below is the example where you use
“XXX.abc” as the access point name (APN) and use the
FOMA USB Cable (option). For the actual access point
name (APN), contact your Internet service provider or
network administrator.
The setting here will be the access point number for
dial-up network setting (see page 21).
For Windows 2000
Set an Access Point Name (APN)
1
Connect the FOMA USB Cable to the FOMA
phone.
2
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable, which is
already connected to the FOMA phone, to the
personal computer.
3
Start Hyper Terminal.
“ スタート (Start)” → “ すべてのプログラム (All programs)” → “ アクセ
サリ (Accessories)” → “ 通信 (Communications)” → Open “ ハイパー
ターミナル
(Hyper Terminal)”.
After starting Hyper Terminal, when the message “ 『既定の Telnet 』
プログラムにしますか? (Select the specified Telnet program?)” is
displayed, set as desired. Contact the maker of your personal
computer and Microsoft Corporation for the setting contents.
p For Windows 2000, “ スタート (Start)” → “ プログラム (Programs)”
→ “ アクセサリ (Accessories)” → “ 通信 (Communications)” → Open
“
ハイパーターミナル
(Hyper Terminal)”.
4
Enter any name in the “
名前
(Name)” field,
then click “OK”.
Here, “Sample” is entered as an example.
5
Select the connection method.
<When you can select the COM port number of
“FOMA P704i”>
Select the COM port number with which you install the “FOMA
P704i” in the “ 接続方法 (Connection method)” field, then click “OK”.
Then, go to step 6.
p Here, “COM3” is selected as an example. See page 18 for the
COM port number of “FOMA P704i” you should actually select in
the “
接続方法
(Connection method)” field.
For Windows XP