Docomo FOMA P704i, Manual

Page: 160 / 495

158
Camera
Common
replay mode
[Movie Mode
only]
You can set a shooting size appropriate for
attaching to i-mode mail.
YES
p “File size setting” is set to “Mail restrict’n
(S)”, and “Image quality set.” (Movie
Mode) is set to “Normal”.
Information
<File size setting>
p When the “File size setting” is set to “Long time”, “Store
in” is set to “microSD”. When “Long time” is set and the
camera is finished and re-activated, the file size setting
switches to “Mail restrict’n (L)”. Then “Store in” stays set
to “microSD”.
<Camera settings>
p Note that the image may blur in Night Mode because the
exposure takes a longer time.
p If you set “Flicker correction” to “Auto”, it may take a
while to automatically adjust the image quality. In this
case, switch to Mode 1 or Mode 2 according to the power
frequency provided in the shooting location.
<Storage setting>
p See “Select storage” for how to set a storage location on
the microSD memory card.
p If you change “File size setting” to “Long time”, “Store in” is
set to “microSD” and “Storage setting” cannot be operated.
p When “Auto save set” is set to “ON”, the image is saved
to the latest folder if “Select storage” is not set or the
folder set as a destination folder is deleted.
p
When “Store in” is set to “microSD” in Movie Mode, you
cannot change “Auto save set”.
<Image stabilizer>
p This function is only for decreasing the degree of camera
shake, so its effect differs depending on the subject or
condition.
p
Image Stabilizer might not work effectively in the
following cases:
・
When the camera shakes to a great extent
・
When zooming is in use
・
When shooting moving subjects
p When “Photo mode” is set to “Sports” or “Night mode” in
Photo Mode, “Image stabilizer” become invalid.
p It might happen that residual image remains in the area
where the subject is moving, or noise is found in overall
area. In that case, set this function to “OFF”.
p
As peripheral pixels are used for the process of Image
Stabilizer, the shooting range differs depending on the
“Auto” or “OFF” setting.
p When this function is activated, the processing time after
shooting might be longer about two seconds because of
the process of Image Stabilizer.
p When you set Image Stabilizer to “Auto” while the image
size is set to 2M (1600 x 1200), it changes to 1.8M (1536
x 1152).
Function menu Operation/Explanation
You can set the file restrictions for when you save the
shot still or moving image.
The operation of attaching to i-mode mail is disabled
at the receiving end who has received the image as
the first distribution.
1
Finder display
i
( )
Storage setting File restriction
or
Post View display in Photo Mode, Movie
Mode or Photo sending/Detailed display
in Continuous Mode
i
( ) File restriction
2
File unrestricted or File restricted
<Shooting effect>
p When “Image size setting” is set to larger than “VGA
(640 x 480)”, you cannot shoot with a frame.
p
You cannot save the shot still image as the mirrored
image.
p When “Image size setting” is set to larger than “VGA
(640 x 480)”, cushy marks cannot be pasted in Photo
Mode.
<Cont.shooting set.>
p The number of shots that can be set differs depending on
the image size. The number of shots that can be set is as
follows:
CIF (352 x 288): 4
Stand-by (240 x 320): 5 through 10
QCIF (176 x 144): 5 through 20
Sub-QCIF (128 x 96): 5 through 20
<Display size>
p When “Image quality set.” is set to “Super fine”, the
setting is always “Fit in display”.
p
The setting on the Finder display is reflected on the Post
View display; however the setting on the Post View
display is not reflected on the Finder display.
<Common replay mode>
p When “File size setting” is set to “Long time”, or “Store in”
is set to “microSD”, you cannot operate.
File Restriction
Setting at purchase File unrestricted
Information