Docomo FOMA P704i, Manual

Page: 466 / 495

29
Installing the communication setup files (driver) is
required when you connect the FOMA phone to your
personal computer via the FOMA USB Cable (option) for
the first time.
p Operate as the user who has the PC administrator right.
1
Connect the FOMA phone and the FOMA USB
Cable. (See page 3)
2
Start Windows, then set the provided “FOMA
P704i CD-ROM” into the personal computer.
3
Close the “FOMA P704i CD-ROM” display.
p This display automatically appears when you set “FOMA P704i
CD-ROM” into the personal computer. It may not appear
depending on the settings of your personal computer. In this case,
go to step 4.
p If this display appears during installation of the “P704i
communication setup files” (driver), close the display.
4
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable, which is
already connected to the FOMA phone, to the
personal computer.
5
Start installation.
Pop-up message “ 新しいハードウェアが見つかりました (New
hardware was found)” appears for a few seconds from the indicator
of the task bar, then the display below appears.
Open “
ドライバソフトウェアを検索してインストールします
(Search and install driver software)”, then click “ 続行 (Continue)”.
p
This display may not appear depending on the personal computer
you use.
For Using
Windows Vista
Installing Communication Setup Files
(Driver)
6
Detect new hardware.
Select “ ディスクはありません。他の方法を試します (No disk is
found. Try another method)”, and select “ コンピュータを参照してド
ライバソフトウェアを検索します
(Browse in the computer and
search driver software)”.
7
Select a driver.
Uncheck “
サブフォルダも検索する
(Search the sub folders too)”.
Click “ 参照 (Browse)”; specify “<CD-ROM drive name>:¥USBDriver
¥P704i_USB_Driver¥WinVista32”; then click “ 次へ (Next)”. (The
CD-ROM drive name varies depending on the personal computer
you use.)
8
Click “ このドライバソフトウェアをインストー
ルします (Install this driver software)”.
p
The installation may be automatically completed without showing
this message depending on the personal computer you use.
9
Click “ 閉じる (Close)”.
All the four “P704i communication setup files” (driver) (see page 30)
are installed.
After the installation of all the “P704i communication setup files”
(driver) is completed, a pop-up message “
デバイスを使用する準備
ができました。デバイス ドライバ ソフトウェアが正しくインス
トールされました。
(The system is ready to use the device. The
device driver software was installed correctly.)” appears for a few
seconds from the indicator of the task bar.
Next, confirm that the “P704i communication setup files” (driver) are
installed correctly. (See page 30)