Docomo FOMA P704i, Manual

Page: 365 / 495

363
Data Communication
If you need FirstPass (user certificate), install the
FirstPass PC software from the provided CD-ROM and
make the setting.
For details, refer to “FirstPassManual” (PDF format) in
the “FirstPassPCSoft” folder on the CD-ROM.
Adobe Reader (version 6.0 or higher is recommended) is
required to see “FirstPassManual” (PDF format). If it is
not installed in your personal computer, install Adobe
Reader from the provided CD-ROM to see it.
For details such as how to use it, refer to Adobe Reader
Help.
To carry out the communication using the FOMA phone,
the following conditions are required:
p The personal computer to be used can use the FOMA USB
Cable (option).
p
The PDA to be used should support FOMA packet
communication and 64K data communication.
p Within the FOMA service area
p For packet communication, the access point should
support packet communication of the FOMA.
p
For 64K data communication, the access point should
support the FOMA 64K data communication or ISDN-
synchronous 64K.
Even when these conditions are satisfied, if the base
station is congested or the radio wave conditions are
bad, you may not carry out the communication.
For the data communication, the following operating
environment is required for your personal computer:
p The operation on the upgraded OS is not guaranteed.
p The memory requirements and hard disk space size may
vary depending on the system environment.
About access authentication for using
browser
Conditions of packet communication
and 64K data communication
About Operating Environment
■ PC main unit
PC/AT compatible model
When using the FOMA USB Cable (option):
USB port (Universal Serial Bus Specification Rev1.1
compliant)
Display resolution 800 x 600 dots, High Color 16 bits or
more recommended.
■
OS
Windows 2000, Windows XP, Windows Vista (Japanese
version in each)
■ Memory requirements
Windows 2000: 64 Mbytes or more
Windows XP: 128 Mbytes or more
Windows Vista: 512 Mbytes or more
■ Hard disk space size
Unused memory space of 5 Mbytes or more
The following hardware and software programs are
required besides the FOMA phone and personal
computer:
p FOMA USB Cable (option) or FOMA USB Cable with
Charge Function 01 (option)
p
Provided “FOMA P704i CD-ROM”
The following two ways are available for connecting the
FOMA phone to another device:
Connect the FOMA phone to a personal computer provided
with the USB port using the FOMA USB Cable (option).
This way of connection applies to all types of
communications such as packet communication, 64K data
communication, and data transfer.
p Set “USB mode setting” to “Communication mode”. (See
page 294)
p
You need to install the “P704i communication setup files”
(driver) before use.
By using infrared rays, you can send/receive data files
to/from another FOMA phone, mobile phone, or
personal computer provided with the infrared data
exchange function. (See page 296)
This applies to data transfer only.
The procedure below shows a preparation flow for
packet communication or 64K data communication.
For details, refer to the PDF version of “Manual for
Data Communication”.
1
Connect a personal computer to the
FOMA phone via the FOMA USB Cable
(option).
2
Install the “P704i communication setup
files” (driver).
3
Check the setting after installation.
Necessary Devices
Information
p
Purchase a dedicated “FOMA USB Cable” or “FOMA
USB Cable with Charge Function 01”. The USB cable for
personal computers cannot be used because the shape
of the connector differs.
p In this manual, operations are described for the case of
using FOMA USB Cable.
Connect FOMA Phone to Other Devices
Using FOMA USB Cable
Using Infrared Data Exchange
Preparation Flow for Data
Communication